ASA-312 Application Notes

• How to measure switch to protect time
• ASA 312 running on protect
• How to measure SONET APS times with the ASA 312
• Q & As about ATM VCCs
• Using ATM for facility delay measurements
• Using ATM QoS to test propogation delay
• ATM VCC table configuration limitations
• DS3 ATM continuity check
• OC3c ATM continuity check
• OC12c ATM continuity check
• DS3 ATM BER test setup
• OC3c ATM BER test setup
• OC12c ATM BER test setup
• ATM OC12 stress test
• How to scan ATM cells on ASA 312
• Setting up the ASA 312 for DS1 testing
• Auto detection of DS1 line code
• SONET DS1 drop and insert
• SONET DS3 drop and insert
• DS3 M13 pass through feature
• DS3 errors on hot signal
• Using ASA 312 SONET in the SDH environment
• How to use ASA 312 for SDH testing
• Setup for STS-3c pattern and STS-12c pattern
• Optical receiver sensitivity using ASA 312
• Single-Mode and Multi-Mode Fibers
• STSX1 pass through
• Orderwire handset operation
• ASA 312 to TTC310 OC48c testing
• How to save results of a test to a text file
• Long duration timed tests can be risky
• Using the ASA 312 Print Interval feature
• Saving and restoring test setups to an SRAM card
• How to copy a file to a PC
• Printing to a file using RAM
• Event Log has control of printer
• ASA 312 FTP to PC file transfer
• Loading SRAM files into an ASA 312
• Printing through a remote PC to a local printer
• Transferring test results to a PC via SRAM
• Output disk flash does not mean PCMCIA
• SCPI script file instructions
• ASA 312 SCPI over Ethernet
• ASA 312 software history
• Patch for remote control configuration
• Remote control over Ethernet
• How to increase you success of upgrading
• New About Info screen for ASA
• ASA 312 connectors explained
• Using the ASA 312's large LEDs function
• Setting password protect on the ASA 312

NAA I Application Notes

• Remote SONET testing with the Titan 550
• New NAA I SCPI commands
• Installing cards in an NAA I
• Specs for the NAA I fan tray
• NAA I and the Digital Cross Connect
• NAA I in a manufacturing environment
• NAA I and the Matellic Test Access Switch
• NAA I and the Optical Test Access Switch
• NAA I communications problems