Have a question about a Digital Lightwave product? Need a quote? Click here to contact our sales professionals.
The NIC Plus is a one-stop solution for many applications.
Thanks to the variety of tests and applications it can support it can be used to support field circuit test and network turn up applications where a variety of interfaces may be needed day to day, as well as production line usage where automation support and port density is critical or lab use where remote test and in-depth analysis are a requirement.
Equip the NIC Plus with the exact functionalities and protocol support you need.
Support up to 8 different physical interface protocols in a single analyzer. Need an Ethernet analyzer first thing in the morning? Now a Fibre Channel analyzer? A SONET/SDH analyzer later in the day? The NIC Plus has got you covered.
Support for SDH, SONET, OTN, Ethernet, Fibre Channel, PDH, ATM, serial interface and DWDM testing capabilities.
Test next generation transport technologies such as Ethernet over OTN, Fibre Channel over OTN or Ethernet over SDH over OTN.
Test tomorrows technologies as well as todays SONET/SDH, OTN, 40Gb/s, 43Gb/s, Ethernet, Fibre Channel and advanced NGN mappings.
The NIC platform is ready to support 100G/s for your 100G product and service introduction.
Ready for 100Gb/s
With five-slots available, the NIC Plus provides telecomm and datacomm testing in one chassis, capable of unmatched multi-port configurations as well as jitter and wander testing.
Every NIC supports remote control as standard, supporting up to 9 remote users using a combination of the NIC remote control GUI application and VNC for control from any VNC supported device.
Today's transport networks feature a multitude of layers and mapped protocols. The NIC fully supports multi-layer service testing allowing you to test at OTN or SONET/SDH interfaces with support for GFP/GMP mapping of Ethernet, 10 Gigabit Ethernet and Fibre Channel services and analysis of any intermediate control layers.
Your test is only as valuable as the results it produces. The NIC provides in-depth reporting including full error and alarm counts and rate display, graphing capabilities, report generation, and full event logs recording the beginning and end of every single event that is detected, whether it be a single bit error or an hour long loss of frame, not one detail is missed ensuring you can pinpoint the cause of any network issues.
NGN networks require not only bit error rate testing of a circuit but analysis at each of the layers / protocols supporting the delivered service. Use the NIC to perform service testing including Ethernet stress testing, Fibre Channel throughput, QoS testing, RFC-2544 benchmarking from lower layer protocols and analyze the mapping mechanisms that are being used in the transport of that service.
Test 40 Gigabit SONET/SDH and OTN networks using OC-768 / STM-256 and OTU-3 interfaces.
Support layered data services and full ODU multiplex structures including Ethernet mapped from an ODU-0 through to the ODU-3 and Ethernet mapped through GFP into SONET/SDH.
SONET/SDH test features
OTN test features
The definition of flexibility the MSA 2020 / 2030 modules support 5 physical protocols on a single module. A single module is all that's needed to test Ethernet, Fibre Channel, SDH, SONET and OTN interfaces up to 10Gb/s rates.
Maximise the usage of the module by testing up to 3 separate interfaces simultaneously, mixing dual 1Gbs/s, 2Gb/s, 4Gb/s, 1000Base-T, Fast Ethernet and Gigabit Ethernet testing with 10G Ethernet LAN / WAN PHY, 8G, 10G Fibre Channel, SDH and OTN ports.
tester with this module to testSDH features
NGN SONET/SDH test features
OTN test features
Ethernet test features
Fibre Channel test features
Testing multiple Ethernet ports simultaneously can shorten overall test time, reduce your implementation time and save money. With the High Density Ethernet module for the NIC platform, you can test up to eight electrical ports and four optical ports on a single High Density Ethernet module. Up to four of these modules can be installed in the NIC Plus or NIC EP chassis enabling even higher density. Add 10GigE LAN/WAN testing to fully test Ethernet systems at today’s highest data-rates.
Up to 12 ports supporting 10 / 100 / 1000 Base-T, Fast Ethernet, Gigabit Ethernet and Fibre Channel at 1Gb/s and 2 Gb/s.
Ethernet test features
Fibre Channel test features
Cost effective module supporting legacy SONET/SDH and OTN testing.
SONET/SDH test features
OTN test features
Support your existing copper infrastructure with the PDH test module, supporting up to 4 interfaces from 1.5Mb/s to 140Mb/s.
PDH test features
Test support for low speed serial interfaces.
Serial interface test features
DWDM Optical Spectrum Analyser
DWDM test features
Please provide the following information:
Name *
Email *
Company *
Phone *
Country *
Title
Product Line
Technology
Subject
Message
Receive helpful tips and special offers from Digital Lightwave?
For DLI Tech Support issues, please provide the following information and a customer service representative will respond to your request as soon as possible.
Emails received after 5:30pm EST will be replied to the next business day.
Name *
Email *
Company *
Phone *
Country
Product
Serial Number
Software Version
Message
Receive helpful tips and special offers from Digital Lightwave?
